FixPlainly

KitchenAid dishwasher error codes

KitchenAid dishwashers. Models with a display show an F#E# code. Models without one flash the Clean light: count the first group of flashes for the F number, wait for the short pause, then count the second group for the E number. Seven flashes, a pause, then one flash means F7 E1.

11 code meaningsLast checked against its sources on

Water supply and filling

H20: Not detecting water

The dishwasher can’t detect water coming in.

Also shown as H2O
You can usually fix thisFix steps

Draining and overfilling

F9 E1: Long drain (not draining)

The dishwasher took too long to drain.

Fixable with careFix steps

F9 E2: Drain motor error

KitchenAid lists a drain motor error. Its checks start with the drain itself.

Fixable with careFix steps

F6 E4: Float switch tripped (dishwasher not level)

KitchenAid lists the water float switch. A dishwasher that isn’t level can trip the overfill float switch and cause this error.

You can usually fix thisFix steps

Leaks

F8 E4: Water in the drip tray

Water has been detected in the drip tray underneath the dishwasher.

No display? 8 flashes, a pause, then 4 flashes, repeating.
Fixable with careFix steps

F8 E5: Fill valve stuck open

The valve that lets water in may be stuck open, so water can keep running in. Act quickly to stop the water.

No display? 8 flashes, a pause, then 5 flashes, repeating.
Usually needs a technicianFix steps

F10 E5: Diverter leak

KitchenAid lists a diverter leak as the likely cause.

Also shown as FA E5
No display? 10 flashes, a pause, then 5 flashes, repeating.
Fixable with careFix steps

Parts and sensors

F7 E2: Wash motor error

Power cycle for 30 seconds. Schedule service if the code returns.

Usually needs a technician

F6 E1: Main control user interface error

Power cycle for 30 seconds. Schedule service if the code returns.

Usually needs a technician

F3 E2: Temperature or water sensor fault

KitchenAid lists the thermistor or OWI sensor. Power cycle for 30 seconds; schedule service if the code returns.

Usually needs a technician

F2 E2: Main control communication error

Power cycle for 30 seconds. Schedule service if the code returns.

Usually needs a technician

Resetting a KitchenAid dishwasher

KitchenAid’s power cycle: disconnect the dishwasher for 30 seconds. Unplug it if it plugs in; if it’s hardwired, switch off its breaker at the electrical panel. Then restore power.

Sources

  1. Dishwasher Error Codes: Reading (opens in a new tab), KitchenAid Product Help
  2. Clean Light Flashing: Dishwasher (opens in a new tab), KitchenAid Product Help
  3. F9E2: Dishwasher (opens in a new tab), KitchenAid Product Help
  4. 8 Pause 4 Pause (F8E4): Dishwasher (opens in a new tab), KitchenAid Product Help
  5. E4: Dishwasher (F8E4 checks) (opens in a new tab), KitchenAid Product Help
  6. F8E5: Dishwasher (opens in a new tab), KitchenAid Product Help
  7. 10 Pause 5 Pause (F10E5): Dishwasher (opens in a new tab), KitchenAid Product Help
  8. F6E4: Dishwasher (opens in a new tab), KitchenAid Product Help
  9. F3E2: Dishwasher (opens in a new tab), KitchenAid Product Help
  10. F2E2: Dishwasher (opens in a new tab), KitchenAid Product Help
Last checked against its sources on